HippoRIngRender-red

Clayoo® is an advanced modeling application with the ability to effortlessly create organic 3D CAD forms efficiently and accurately.It doesn’t matter whether you start from a sketch, curve, or a 3-D object, you can pull, push, and move until you get the shape you want, basically it’s like modeling by hand!  Clayoo® is a Subdivision (SubD) surface modeler that runs inside of Rhino. SubD surfaces are easy to model in a push-pull fashion.A Subdivision Surface (SubD) is any polygonal surface that has then had an process applied that “smoothes” the original surface by adding more polygons (higher resolution), and modifying the final surface shape by analyzing the polygons in the original surface.

horse1-by-Kian-Dastyar

horse – by Kian Dastyar

 Clayoo is quite similar to another third-party plug-in for Rhino 5.0, called T-Splines. T-Spines has been around for a few years now, and was recently acquired by Autodesk. If you are familiar with T-Spines, or you have seen the types of things you can create using T-Spines, you should have a look at Clayoo.

 If this all sounds like rocket science to you I recommend that you watch the videos below to get an idea of how it works.  If you are a Jeweller who creates organic designs, this is a must have tool for your studio. If you would like to learn more about SubD modeling I recommend you read this article.

  RhinoClayoopiggy-sml

 

 

 

 

Clayoo® is available for 495 EURO, and is included FREE with RhinoGold 4.0

 

Clayoo Demo Videos

 

Claim your 5 FREE!

RhinoGold Tutorial Videos

You'll receive the lessons over the next few weeks, and learn...

  •  
    How to navigate the RhinoGold interface
  •  
    How to create 3 men's wedding rings
  •  
    How to make a bezel set diamond ring
  •  
    How to make a channel set eternity ring

 

You have Successfully Subscribed!